Industrial wireless i/o modules

wireless DIN

Industrial radio control

Performance
■ 1 Mile (2.km) line-of-sight with with 938432 or 938438 antenna
■ 3 Miles (5 km) line-of-sight with 938433 antenna
■ 1200. feet (300.m) in-building range with 938011 antenna
■ Dry isolated contact input N/O
■ Relay output SPST N/O

Installation features
■ Operates in the license-free 433 MHz ISM band
■ Easy installation, Matched set No programming required
■ Panel mount or clip snaps onto DIN-35 rail DIN rails

Applications: Industrial Monitoring, Pump control, Monitor remote instruments, sensors and
detectors, Packing and mobile system, SCADA installations, Factory process control and alarms.


	Information and Prices

Specifications Digital Transmitter

Supply power	12/24 VDC @ 400 mA
Inputs	N/O Normally Open, digital dry contact
Transmitter power	per FCC Part 15.249, 50mV/m @ 3m
Transmission	Digital Encoded Gaussian_frequency-shift_keying
Channels	16 addresses per system GFSK
Connection	Open wire
Response	Loop 500 msec
Weight	1.4 lb (0.64kg) each unit
Dimensions	4.50 x 3.50 x 1.25 in. / (114.30 x 88.90 x 31.75 mm)

Antenna Sold Separately

Specifications Digital Receiver

Supply power	12/24 VDC @ 300 mA
Outputs	Relay 1Amp SPST 30V Class 2
Frequency	433 MHz • License free Industrial
Configuration	DIP switch factory preset
Transmission mode	Supervised Tx Rx carrier
Compliance	FCC CFR part 15.247
Antenna Z	50 Ohm SMA connector
Ambient temp	14° to 140° F (-10° to 60° C)
Enclosure	Plastic ABS NEMA1, IP22

938433 Yagi Antenna 12 E
14 dBi 3 Mile
Length: 43", Weight: 3.lb
with 10 ft coax cable and connector

938432 Antenna 3 E Yagi
7 dBi 1 Mile
Length: 18", Weight: 1.lb
with 10 ft coax cable and connector

938438 Omni 3 dBi Antenna
Length: 37", Weight: 3.lb
with 10 ft coax cable and connector

938011
0 dBi Short range
7" Omni Antenna
5ft coax cable SMA

DISCLAIMER: Radio control equipment in not to be used in life safety. Radio Installations shall be performed by a certified professional.